Its next ovation was 100 yards away and it was headed right for me. Mid-week on the hunt I heard a bull bugle on the mountain well above me. I was so confident (and stupid) that I didn’t carry a rangefinder. This configuration gave me near point-blank range out to 40 yards. This was my first season hunting elk with a crossbow and believed that I’d figured the ultimate sighting method- a red dot scope sighted at 30 yards. Two years ago, I drew a Wyoming elk tag and found myself in the path of a monster herd bull. Carry a rangefinder and you’ll be ready at any range. TenPoint’s ACUdraw system is built into the stock and always ready for a second shot. Some bows offer add-on systems, but they can be forgotten or operated improperly. The ACUdraw system work on a gear principle and you can hear the bow cock and relax by a distinct clicking sound that assures the tremendous power of the bow isn’t unleashed at one time. The crank snaps in snugly and I’ve carried one over many miles and mountains with zero problems. The system works using a crank handle that nests into the handle so you don’t have to find it in the heat of a moment, or lose it. TenPoint was a pioneer in “cranking draw systems” and it’s ACUdraw gear is found on both the TenPoint and Horton lines. I’ve cocked many models of bows and this is the easiest and most efficient by far. Cocking ropes work every time, unless you forget or lose them. One use and you’ll be hooked, no pun intended.Įven better is the ACUdraw 50 system that uses the same rope-retracting technology with the rope handles attached to the bow stock. Additionally, the strings retract into the handles so that there is not string tangle to mess with. The ACUrope system fits into a small pouch that easily fits on your belt so that you can grab it and re-cock in seconds. TenPoint easily has the two best rope-cocking systems in the industry. Put a piece of red tape (red for right) on the right rope handle so that you use it properly every time. Depending on the rope you use, attach the hooks to the string with the opening facing up which prevents the hooks from jumping over the barrel. Additionally, you can use your leg and thigh muscles for much of the force. The rope will affix the string in the same location consistently resulting in reliable accuracy. Leveraging a bow to full cock with a rope reduces the force required by 50 percent, sufficient to allow most recurve crossbows and nearly all compound bows to be cocked by an adult of average strength. A pair of leather gloves makes the process easier. Additionally, using this method puts a lot of pressure on your back and arm muscles. Most companies discourage this method because you may put more pressure on your dominant hand and not engage the center of the string, resulting in inconsistent accuracy. If you are strong enough, you may be able to cock your bow by hand. Here’s a look at each of these methods to help find the best method for you. The final method involves a crank or pulley and can be done with very little effort. The most popular method is to use a cocking-rope which reduces the amount of energy needed by 50 percent. Is one cocking method better than another? Is speed more important than the most consistent method? What about cocking a bow with your hands?ĭepending on your strength and the draw weight of the bow, you may be able to cock a crossbow with your hands. Over the years a variety of cocking mechanisms have emerged progressing from primitive levers to cocking ropes, and cranks that take very little effort. Although there are other advantages, the ability to simply aim-and-shoot is one of the greatest. The major benefit of a crossbow over a compound is the ability to store energy “at full draw” for extended periods of time.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |